taxonomy-1636,taxonomy-1637,taxonomy-1638,taxonomy-1639,taxonomy-1635
Models D0110 and D0130
Models D0110 and D0130 (w/CR round transition) Curtain Fire Dampers, designed for use in dynamic "fans on" systems where the HVAC system remains operational in the event of a fire, are UL approved for use where building codes require protection of HVAC ductwork penetrations in walls, partitions or floors that have a fire resistance rating of 2 hours or less. The D0100 Series features stainless steel closure springs for assured damper closure under airflow.
Product Notes:
- Material: 22 ga. galvanized steel.
- 4¼" (108) wide frame. Maximum Velocity: up to 2000 fpm @ 4" w.g. (see chart below for size mounting limitations.)
- Closure Device: FL Fusible Link.
- Closure Temperature:165 165°F (74°C).
Models 0722 and 0725
Nailor Model 0722 Ceiling Dampers are for use in round applications, in lieu of hinged door type dampers in any UL/ULC floor/ceiling or roof/ceiling assembly with up to a 3 hour fire resistance rating where air ducts are allowed.
Model 0725 Thermal Blankets are designed to insulate the exposed back pan area of a steel ceiling diffuser that may be used in UL Classified floor/ceiling or roof/ceiling assemblies with up to a 3 hour rating.
Model Series 0800 and 08SCL
The Nailor 0800 Series Flat Oval duct access doors are engineered to provide a premium quality, ultra-low leakage door with optimum ergonomics in mind. The unique oval shape was designed after careful study of the needs of site engineering and maintenance personnel. Each door allows a different degree of access, enabling the most appropriate unit to be specified, depending on duct size and likely maintenance requirements.
The O8SCL are economical quality access doors meet SMACNA requirements for systems up to 2" w.g. (500 Pa) and provide quick, simple installation wherever duct access is required.